Instructions for use
-
TO PREVENT THE 3 IN 1 GEL ENAMEL FROM PEELING OFF, FILE SOFTLY NAILS' SURFACE TO REMOVE IMPERFECTIONS AND CLEAN THEM WITH PURE ACETONE
-
ENTER THE APP
-
SELECT THE COLOR
-
SELECT THE NUMBER OF NAILS TO BE PAINTED DEPENDING ON THE SIZE OF THE NAILS,
-
FOR LONG NAILS - SELECT 10 NAILS
FOR SHORT NAILS - SELECT 5 NAILS
(THE LAST NUMBER SHADED IN GREEN INDICATES THE MINIMUM AMOUNT OF NAILS TO BE PAINTED DUE TO THE MIXTURE TO OBTAIN THE SELECTED COLOR) -
SELECT THE COLOR DISPENSERS INDICATED BY THE APP
-
TO OBTAIN THE SELECTED TONE, IT IS VERY IMPORTANT TO REMOVE THE EXCESS OF AIR;
-
UNLOCK THE FIRST DISPENSER FROM THE LOWER PART, REMOVE THE NOZZLE COVER, SELECT NUMBER 5 IN THE DISPENSER, PLACE IT HORIZONTALLY FACING UP AND SLOWLY PRESS IT UNTIL THE PRODUCT BEGINS TO POUR, CLEAN THE NOZZLE AND THEN
-
SELECT THE NUMBER ON THE DISPENSER THAT THE APP INDICATES (1⁄2, 1, 2, 3, 4, 5)
-
UNCOVER THE ALUMINUM CONTAINER, PLACE THE DISPENSER HORIZONTALLY WITH THE
-
TIP FACING DOWN AND PRESS FULLY THE AMOUNT OF DROPS INDICATED BY THE APP
-
REPEAT THE STEPS 6 TO 8 WITH THE FOLLOWING DISPENSERS
-
MIX WITH THE BRUSH TO GET THE SELECTED COLOR
-
APPLY WITH THE BRUSH THE FIRST LAYER IN AN UNIFORM WAY AND DON'T FORGET TO
-
INCLUDE THE TIP OF THE NAIL TO PREVENT THE GEL ENAMEL FROM PEELING OFF
-
DRY THE FIRST LAYER WITH THE LAMP (WHICH IS PROGRAMMED WITH THE RIGHT TIME),
-
PLACING THE FINGERS SO THE LIGHT COVERS THE PAINTED NAILS COMPLETELY
-
APPLY THE SECOND LAYER FOLLOWING THE INSTRUCTIONS IN STEPS 11 AND 12